Double Stack
Parking
The Double Stack Parking System by AUTOGRO is engineered for car parking facilities that need to maximize capacity on a limited footprint. By stacking one vehicle directly above another using a motorized hydraulic platform, this system effectively doubles the number of cars parked in the same area.
Ideal for apartment complexes, offices, shopping centres, and commercial parking facilities, the Double Stack system is one of the most cost-effective solutions available for urban car parking — with no structural modifications required.
Why Choose Double Stack Parking?
Key Benefits of Double Stack Parking
Technical Specifications
| Model | AG-2000 | AG-2400 | AG-2800 |
|---|---|---|---|
| Vehicles parked per unit | 2 | 2 | 2 |
| Rated capacity | 2000 | 2400 | 2800 |
| Available car length | 40000mm | 4000mm | 3800mm |
| Available car width | 2300mm | 2300mm | 2290mm |
| Drive mode | Hydraulic cylinder + Chains | Hydraulic cylinder + Chains | Hydraulic cylinder + Chains |
| Operation | Key switch | Key switch | Key switch |
| Lifting speed | <55s | <55s | <55s |
| Descending speed | <45s | <45s | <45s |
| Power supply | 220V / 2HP / 3pH Power | 220V / 2HP / 3pH Power | 220V / 2HP / 3pH Power |
| Finishing | Powder coating | Powder coating | Powder coating |
| Model | AG-2000 | AG-2400 | AG-2800 |
|---|---|---|---|
| Pump motor power | 1.75 Kw | 1.75 Kw | 1.75 Kw |
| Hydraulic cylinder | Two stage type | Two stage type | Two stage type |
| Hydraulic oil | 20 Liter (68) | 20 Liter (68) | 20 Liter (68) |
Safety Features
Mechanical locks engage automatically the moment the platform reaches its target height — securing it in place with zero reliance on hydraulic pressure. Even in a total power failure, the vehicle remains locked at height.
Triggers the moment the lift platform reaches its upper travel boundary, commanding the pump to cut instantly. Eliminates all risk of over-travel, structural stress on the frame, or vehicle contact with the ceiling.
Sensors continuously monitor load, speed, and motion patterns throughout every cycle. On detecting any abnormality — overload, irregular movement, or hydraulic fault — the cylinder halts operation within milliseconds.
High-grade steel and galvanized iron sheet construction, engineered with full load-distribution analysis and stress-point reinforcement at every joint. Certified to meet all relevant structural and vehicle safety standards.
